Download the building instructions for the LEGO® Tesla Model S MOC on Rebrickable!
With Ocean Julyner Month starting, I had to come up with a new design template (which I may use in my upcoming designs) for my LEGO versions of well known ocean liners and cruise ships.
I then remembered my previous models of ships that were pretty rough in realism, proportions and color schemes. A redesign it is then – and the LEGO RMS Queen Mary 2 was the perfect candidate for a brand new look!
Name: LEGO® RMS Queen Mary 2 Ocean Liner MOC
Total Parts: 131
Approximate Scale: 1:1400
Creation Time: 2 hours (designing) + 40 min. (rendering) + 30 min. (video-editing)
Brick Colors: Red, Black, White, Navy Blue, Orange, Transparent-Blue
Unlike the Tesla, my approach on this model was different. Turns out, that the previous version of the RMS Queen Mary 2 was almost perfect in proportions ! The old “eye it all out” technique worked surprisingly well back then. However, I had to accommodate the 1×4 hinges on the ship with at least 4 consecutive columns, so I had to tweak the scale a bit and settled at around 1:1400 being able to fit all the major elements of the original ship into a micro-scaled version of it.
There is a lot to talk about the design of my LEGO RMS Queen Mary 2 MOC.
For starters the hull: red 2×4 and 1×2 plates form the main base-plate with red 1×2 stud plates attached underneath. Lots of black 2×2 bricks, 1×4 tiles and 1×1 bricks with studs were used for the overall shape and form of the upper part of the hull. The front of the ship also features the bulbous bow that the QM2 uses for sturdier navigation and stability.
Going upwards you will find 4 columns of white 1×4 hinge plates which should represent the passenger cabins with orange and dark blue emergency life-boats placed along lower-middle portions of these columns right above the deck of the ship.
Near the front of the ship you will find a rounded slope going up-to the wide bridge and observation deck with the antennas and communication compartments at the very top.
Going to the rear, there’s the infamous black and red funnel with a set of exhaust funnels at the very back before the shape of the ship goes downwards towards the rear-deck.
The Final Touches
If you’ve read my previous blog posts, you might know by now that I usually design my models in “grayscale mode”. I use light-bluish-gray as the default tone when I design new models so that the colors won’t be distracting me too much from the process. This time was quite different.
Since I had to import the older design of the RMS QM2 from my archive, I already had colors to work with. There were many parts to change in order to match the red, black and white color pattern of the original RMS Queen Mary 2 ocean liner. Here’s what the final result looked like before sending it to the rendering phase:
In The End
This is just the beginning of Ocean Julyner Month! Don’t forget that you can also be a part of this event either by posting your creation on The Bobby Brix Discord Server or by using the #julyner hashtag on Instagram.